|
|
|
| |
| Home > Services > Voice
over IP > Products > Technical Data > Quadro
E1 / T1 |
|
 |
|
|
|
| Technical Specifications |
|
 |
|
 |
|
| Telephony |
|
Voice
Features
Voice Coding G.711, G.723 (5.3, 6.3 kbit/s), G.726 (16,
24, 32, 40 Kbps), G.729, iLBC (13,33
kbit/s, 15,2 kbit/s);(RFC 3951, ITU-T: G711,
G.723.1 Annex A, G.726, G729 Annex A; IETF; ITU-T Q.23,
Q.24, Bellcore GR.506, GR.181; ITU-T .168-2000, 2002;
ETS_300659_1,2,3; A-law, m-law coding)
NAT traversal (both manually and STUN)
VAD, CNG, G.168 echo cancellation |
|
PBX
Features
Call statistics
Call routing
Auto Attendant
T.38 fax, fax relay and clear channel fax
Call Signaling
SIP on the WAN and LAN side (RFCs: 3261, 3263, 3265,
3311, 3428, 3515, 3842, 3856, 3891,
3892,3581, draft-ietf-sip-session-timer-15, draft-ietf-sipping-dialog-package-05;
Presence: RFCs: 3842, 3856, 3863,
draft-ietf-sipping-dialog-package-05)
SDP (RFC 2327)
RTP (RFCs: 1889, 1890, 2833, 3389, 3550, 3551, 3555,
draft-ietf-avt- rfc2833bis-05, draft-ietf-avt-rtp-ilbc-o5)
H.323 (optional) (ITU-T: H.225.0, H.235, H.245,H.323,
H.450.x, Q.931, Q.932)
Fax over IP (ITU-T: T4, T30, T38, V17, V21, V27 ter,
V29)
POTS Signaling
Loop start
ISDN Signaling
ITU-T: Q.921, Q.931 (DSS1), Q.951; ETSI ETS300 102 (NET5);
ECMA- 143-(QSIG); SR-NWT-002120 (NI2)
NTT INS1500 for Japan
E1/T1Signaling
E1-CAS (MELCAS, ITU, ITU-T2, IUT-T: Q.400, Q.411, Q.421,
Q.422, Q.440-Q.442, Q.450-Q.452, Q.454,
Q.455, Q.457, Q.458, Q.460- Q.468,
Q.470-Q.476 Types: Loop Start, Ground Start; E&M
Delay Dial, E&M Wink Start, E&M
Immediate Start, R2 DTMF, R2 compelled, R2 non-compelled,
R2 compelled with ANI, R2 non-compelled with ANI; R2
Parameters for Brazil, Guatemala and Mexico)
T1-CAS (Loop Start, Ground Start, E&M Delay Dial,
E&M Wink Start, E&M Immediate
Start; ANSI T1.403.02-199, T1.403.02a-2001
PRI switch types: DSS1, NET5, QSIGg, 5ESS, NTT ins1500
DMS 100
DTMF
Caller ID support
In band and out of band signaling support |
|
| Connectivity |
|
Premise
Connections
1 short-loop FXS port (RJ11)
1 Ethernet 10/100BASE T port to connect a PC for configuration
purposes
(RJ45)
Uplink Connection
1 E1/T1 port to the Central Office (RJ45)
1 Ethernet 10BASE T (RJ45)
Billing
Radius Client (RFCS: 2865, 2866)
|
|
| Internet |
|
NAT
address translation
STUN/NAT
traversal (RFC 3489)
Firewall
security via:
NAT
(Network Address Translation)
Policy
and service-based filtering
DHCP
server on the LAN side
DHCP
client on the WAN side
DNS
server with forwarding functionality
SNTP
(Simple Network Time Protocol) server/client for computer
clock synchronization
PPPoE
connection to the ISP with PAP/(MS)CHAP authentication
IP
DIFFSERV for QoS
DNS
support
Port
forwarding
Port
translation |
|
| System |
|
|
Management
WEB interface accessible from LAN
and WAN (HTTP/HTTPS), the WAN management access can
be switched off
Password
control
Remote diagnostics and software
upgrade
Download/restore configuration
Reset button with factory reset
option
Diagnostics/Testing
LEDs: Busy, Info, Fault, LAN, WAN,
Line 1, Line 2
E1/T1 diagnostigs, Loop settings
Remote testing
Power-up diagnostics
|
|
| Environmental |
|
|
Physical
Dimensions
Desktop
devices, wall-mountable:
Measurements: 10.04” x 8.27”
x 1.77” (25.5 x 21.0 x 4.5 cm)
Weight: 22.6 ounces (640 g)
Rack-mountable
devices:
Measurements:
19” x 7.56” x 1.77”
(48.0 x 19.2 x 4.5 cm)
Weight: 2.47 lbs. (1090 g)
Conditions
41°F
- 104°F (5°C - 40°C) operating temperature
41°F - 140°F (5°C -
60°C) storage temperature
5% - 90% non-condensing humidity
Power
Supply
Input
100 - 240 VAC; 50/60 Hz; 0.5 A
Output
12.0 VDC; 1.5 A
Regulatory
Compliance
Safety:
UL 60950; CSA 22;
EMC:
FCC Part 68, FCC Part 15 Class B; EN55022, EN55024;
Telecom:
TBR12, TBR13
Certification
For
Australia, Brazil, Canada, European Community, Mexico,
USA
|
|
|
|
|
|